The Go-Anywhere Vacuum Loaders

The UltraVac® T-475/675/975 series includes highly maneuverable, industrial vacuum loaders with a mid-range power supply and load capacity. This series of one-worker vehicles will improve the efficiency and cost-effectiveness of industrial material handling and cleanup operations. One worker drives to the job site, loads, drives to the dump site, and empties... again and again. It's that simple with the T-475/675/975 series.

The T-475 features an expanded load-carrying capability that readily discharges through a hydraulic tailgate. The unit features many of the hard-working advantages of UltraVac®'s traditional larger chassis-mounted vacuum loaders. The compact T-475 is ideally suited to all those confined areas where bigger units just won't fit.

T-475

Tank Material:
Reinforced A36/50 steel

Tank Capacity:
4 cubic yards (6 and 9 cubic yards for 675 and 975)

Tank Mounting:
Tank is mounted to a common subframe for easy attachment to the truck chassis,

Tailgate:
Hydraulically actuated

Primary Shut Off:
High level probe that automatically indicates a full hopper.

Primary Filtration System:
The UltraVac T-475/675/975 Series features a continuous, reverse pulse-air cleaning filtration system. With Snap-Lok filter bags and venturi-style bag retainers, bag changes are made in less than an hour, with no tools needed. Standard units are equipped with both wet and dry filters. Air to cloth ratio: 9.8:1 (dry mode), 39:1 (wet mode)

Truck Chassis:
Your choice of a heavy-duty industrial chassis. GVWR: 30,000 lbs. (13608 kg.) for 4 cubic yard. Higher GVW required for larger units.

Total Payload Capacity:
4 cubic yards (6, 9 for other units)

Blower Specifications:
Roots-type positive displacement rotary blower. Maximum Air Volume: 2150 CFM (61m3/min.) Maximum Vacuum: 15" hg (5167 mm H2O) at sea level.

Blower Exhaust Silencer:
Blower equipped with high efficiency silencer to reduce noise.

Blower Drive:
Matched V-Belts for separate engine model. Drive shaft for PTO Model.

Hydraulic System:
High-efficiency hydraulic pump operated directly from separate diesel engine. PTO units require utilizing 6 or 8 bolt PTO on truck transmission. pump with 6 or 8 bolt transmission mount.

Easy View Control Panel:
Mounted above the frame on the driver's side, the NEMA 4 panel with plexiglass front enables the operator to monitor the engine as well as the vacuum system without opening the panel door.

Hydraulic Dump System:
A hydraulic cylinder lifts the collector body to a nominal 50 degree dump angle. All airflow paths, bag-houses and collector body interior can be cleaned through hinged doors. No difficult-to-access ducting

Trim:
Need Info

Lighting:
Running lights and reflectors installed in accordance with latest federal standards,

Rear Bumper:
DOT bumper standard.

Painting:
Finished in white or in choice fo any other single acrylic polyurethane color

• Vibrator
• Special Paint